Roof Ice Melt System 2

Roof Ice Melt Products | RIM Recommendations | RIM Product | RIM2 Product | Zig-Zag Heating Cable | Snow Load Classifications | Control Systems | Recommended Specifications | Bylin in the News | General Overview

RIM2 EAVE PANEL – CLASS 2 AREAS

The patented RIM2 Eave Panel is designed to mount on the roof eave and minimize the formation of icicles and ice dams during the winter season. It delivers approximately 50% of the power output of our RIM Eave Panel. The RIM2 System is used in Class 2 areas – accumulation of 6″ to 15″ for significant periods during the winter.

Specifications:

  • Power Output 16w/ft
  • Material Selection: Copper or Kynar painted aluminum
  • Heating Cable Supplied:
    • 2 runs per foot of panel
    • Model WFP-612 for 120V operation
    • Model WFP-622 for 208, 240 and 277V operation
    • UL and CSA approved for roof and gutter de-icing
  • Panel Lengths: Up to 10 feet per panel
  • Components Supplied: Power connection kit, panel splice covers, panel end caps

RIM2 VALLEY PANEL

The patented RIM2 Valley Panel is designed to mount in the roof valleys and provide a heated melt path down the valley and eliminate water ponding in the valley area.It delivers approximately 70% of the power output of our standard RIM Valley Panel and is used in locations with moderate snow accumulation.

Specifications:

  • Power output 16w/ft
  • Material Selection: Copper or Kynar painted aluminum
  • Heating Cable Supplied:
    • 2 runs per foot of panel
    • Model WFP-612 for 120V operation
    • Model WFP-622 for 208, 240 and 277V operation
    • UL and CSA approved for roof and gutter de-icing
  • Panel Lengths: Up to 10 feet per panel
  • Components Supplied: Power connection kit

RIM2 LOW-PITCH PANEL

The patented RIM2 Low-Pitch Eave Panel is specifically designed for integration with metal roof systems and for applications involving roof pitches of 3:12 or less. It is used in areas with heavy snow accumulation.

Specifications:

  • Power output 16w/ft
  • Material Selection: Copper or Kynar painted aluminum
  • Heating Cable Supplied:
    • 2 runs per foot of panel
    • Model WFP-612 for 120V operation
    • Model WFP-622 for 208, 240 and 277V operation
    • UL and CSA approved for roof and gutter de-icing
  • Panel Lengths:Up to 10 feet per panel
  • Components Supplied: Power connection kit(s)

Note: Heated gutters and downspouts should be specified for eaves above walkways, driveways, decks and lower roofs.